Home › Engine / Hybrid System › CRUISE CONTROL › LANE RECOGNITION CAMERA SENSOR › 2014.11–2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301641 LANE RECOGNITION CAMERA SENSOR A

CRUISE CONTROL  LANE RECOGNITION CAMERA SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

If the lane departure warning camera bracket is deformed or damaged, replace it together with the windshield glass.

·

When replacing the windshield glass of a vehicle equipped with a lane departure warning camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the lane departure warning camera may not be able to be installed due to a missing bracket or the lane departure alert system may not operate properly due to a difference in the transmissivity or black ceramic border.

·

If the lane departure warning camera is dropped, replace it with a new one.



PROCEDURE

Hide 86468 1.INSTALL LANE DEPARTURE WARNING CAMERA

a.

When using a new lane departure warning camera:

i.
E306540E01
0.319,1.04 1.064,1.333 false 0.122,0.941 0.326,1.136 0.204,0.195 10 *a

Remove the protective film.

Text in Illustration
*a Camera Hood

NOTICE:
·

Do not touch the camera lens after removing the protective film.

·

Do not touch the camera hood.





b.

Slide the lane departure warning camera in the direction indicated by the arrow (1) shown in the illustration to engage the 2 guides.

E306541E03
0.219,3.542 0.677,3.833 0.458,0.292 10 false 10° 4.521,1.292 4.719,1.458 0.198,0.167 10 false 1 2.938,1.635 3.135,1.802 0.198,0.167 10 false 2

NOTICE:

Do not touch the camera lens and camera hood.



c.

Slide the lane departure warning camera in the direction indicated by the arrow (2) shown in the illustration to engage the guide.


d.

Connect the connector to install the lane departure warning camera.


Hide 86466A 2.INSTALL NO. 1 LANE RECOGNITION COVER

a.

Engage the 4 guides to install the No. 1 lane recognition cover as shown in the illustration.

E306542


Hide 86466B 3.INSTALL NO. 2 LANE RECOGNITION COVER

a.

Engage the 2 guides to install the No. 2 lane recognition cover as shown in the illustration.

E306535E01
0.388,2.721 6.791,4.458 6.403,1.737