Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › SKID CONTROL BUZZER(for LHD) › 2012.03–2014.11
RM2070E _54 Brake _061923 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0301689 SKID CONTROL BUZZER(for LHD) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SKID CONTROL BUZZER(for LHD)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch turns on. Therefore, when servicing brake system components, do not operate the brake pedal or open/close the doors while the auxiliary battery is connected.


PROCEDURE

Hide 89650 1.REMOVE POWER STEERING ECU ASSEMBLY

Hide 86652A 2.REMOVE SKID CONTROL BUZZER ASSEMBLY

a.
C238476

Disconnect the connector from the skid control buzzer assembly.


b.

Disengage the clamp to remove the skid control buzzer assembly.