1.REMOVE UPPER INSTRUMENT PANEL ASSEMBLY
89650
2.REMOVE POWER STEERING ECU ASSEMBLY
Disengage the wire harness clamp from the power steering ECU assembly.
for LHD:
Disconnect the connector from the power steering ECU assembly.
| *1 | Lock of the Lock Lever |
| *2 | Lock Lever |
As shown in the illustration, pull out the lock of the lock lever and turn the lock lever to disconnect the connector.
for RHD:
Disconnect the connector from the power steering ECU assembly.
| *1 | Lock of the Lock Lever |
| *2 | Lock Lever |
As shown in the illustration, pull out the lock of the lock lever and turn the lock lever to disconnect the connector.
Disconnect the 3 connectors from the power steering ECU assembly.
Remove the bolt, 2 nuts and power steering ECU assembly.