Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER › from 2016.05
RM2070E _56 Audio / Visual / Telematics _061931 AUDIO / VIDEO _0301722 REAR DOOR SPEAKER A

AUDIO / VIDEO  REAR DOOR SPEAKER  REMOVAL  


PROCEDURE

Hide 69284D 1.REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG

Hide 2.REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

Hide 74262 3.REMOVE REAR DOOR ARMREST COVER

Hide 67604 4.REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

Hide 86160B 5.REMOVE REAR SPEAKER ASSEMBLY

a.
E228629

Disconnect the connector.


b.

Using a drill bit with a diameter of less than 4 mm (0.158 in.), drill out the 3 rivet heads and remove the rear speaker assembly.

NOTICE:
·

Do not touch the cone part of the speaker.

·

Do not drill the rivet at an angle as this will cause damage to the drill and drill hole. Line up the drill and rivet, and carefully drill out the rivet head.

·

Be careful as the cut rivet will be very hot.




c.

Continue drilling and push out the remaining rivet fragments.


d.

Using a vacuum cleaner, remove the rivet fragments and shavings from the inside of the door.


Hide 86160Y 6.REMOVE REAR NO. 2 SPEAKER ASSEMBLY (for 8 Speakers)

a.
E228631

Disengage the clamp.


b.

Remove the 2 screws and rear No. 2 speaker assembly.