Display the "Display" screen.
Turn the light control switch to the tail or head position.
Check if "Day Mode" setting on the display adjustment screen is on.
| Result | Proceed to |
|---|---|
| "Day Mode" setting is on | A |
| "Day Mode" setting is off | B |
| *a | Example |
A
B
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK).
Check that the display changes between ON and OFF according to the light control switch operation.
| Light Control Switch | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
OK
NG
(See pageAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PROBLEM SYMPTOMS TABLE)