Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2012.03–2014.11
RM2070E _56 Audio / Visual / Telematics _061932 NAVIGATION / MULTI INFO DISPLAY _0301737 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Route cannot be Calculated  


PROCEDURE

1.CONFIRM SYMPTOMS
a.

Confirm the information about the situation when the route calculation did not complete.

Result:
Result Proceed to
Route cannot be calculated for any destination. A
A road in the route is closed or has not been officially opened yet. B
A ferry crossing is included in the route. B
The destination is too close. B
The route cannot be calculated only when driving on a bumpy road. B


HINT:

A route cannot be calculated if the route is unavailable, a ferry crossing is included in the route, the destination is too close or when driving on bumpy roads.




A

2.REPLACE HARD DISK DRIVE

B

NORMAL OPERATION

2.REPLACE HARD DISK DRIVE

b.

Set another destination and check if the system can calculate the route correctly.

OK:

Route can be correctly calculated.




OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE