Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type) › 2014.11–2020.08
RM2070E _56 Audio / Visual / Telematics _061932 NAVIGATION / MULTI INFO DISPLAY _0301739 NAVIGATION SYSTEM(for Radio and Display Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  CD Sound Skips  


PROCEDURE

1.CHECK CD
a.
I100152

Check that the CD is not deformed or cracked.

OK:

No deformation or cracks on the CD.




OK

2.CHECK CD

NG

END (CD IS FAULTY)

2.CHECK CD
a.
I100151

Check the CD.

OK:

The CD is clean.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.




OK

3.REPLACE CD AND RECHECK

NG

CLEAN CD

3.REPLACE CD AND RECHECK
a.

Replace the CD with a new or known good one and check that the malfunction disappears.

OK:

Malfunction disappears.




OK

END (CD WAS FAULTY)

NG

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check the radio and display receiver assembly installation condition.

i.

Check that the radio and display receiver assembly is properly installed.

OK:

The radio and display receiver assembly is properly installed.





OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY