Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type) › 2016.05–2020.08
RM2070E _56 Audio / Visual / Telematics _061932 NAVIGATION / MULTI INFO DISPLAY _0301740 NAVIGATION SYSTEM(for Navigation Receiver Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  B15F7  Certification ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the navigation system vehicle customization screen.

HINT:

The certification ECU (smart key ECU assembly) controls the entry and start system related items that are customizable via the navigation system vehicle customization screen.


DTC No. DTC Detection Condition Trouble Area
B15F7 Certification ECU (smart key ECU assembly) vehicle setting processing malfunction
·

CAN communication system

·

Entry and start system

·

Certification ECU (smart key ECU assembly)

·

Navigation receiver assembly



CAUTION / NOTICE / HINT

NOTICE:

Before replacing the certification ECU (smart key ECU assembly), refer to Service Bulletin.


PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the GTS to check if the CAN communication system is functioning normally.

(w/ Central Gateway ECU: See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING)

(w/o Central Gateway ECU: See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/o Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING)

OK:

CAN communication DTCs are not output.



Result:
Result Proceed to
OK A
NG (w/ Central Gateway ECU) B
NG (w/o Central Gateway ECU) C



A

2.CHECK ENTRY AND START SYSTEM

B

C

2.CHECK ENTRY AND START SYSTEM
a.

for Entry Function:

Check if the entry and start system is malfunctioning (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Entry Function)>HOW TO PROCEED WITH TROUBLESHOOTING).

for Start Function:

Check if the entry and start system is malfunctioning (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the entry and start system.


OK:

No malfunctions are present in the entry and start system.


Result:
Result Proceed to
OK A
NG (for Entry Function) B
NG (for Start Function) C




A

3.CHECK CUSTOMIZE ITEMS

B

C

3.CHECK CUSTOMIZE ITEMS
a.

Make a note of the customizable items for the certification ECU (smart key ECU assembly) related system.

HINT:

The items shown as customizable via the navigation system vehicle customization screen can also be changed using the GTS. In the following step, the GTS will be used.


i.

To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the entry and start system (for Entry Function) related items that can be customized via the navigation system vehicle customization screen (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Entry Function)>CUSTOMIZE PARAMETERS).


ii.

To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the entry and start system (for Start Function) related items that can be customized via the navigation system vehicle customization screen (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>CUSTOMIZE PARAMETERS).



b.

Using the GTS, check that it is possible to change the settings of the customize parameters that are available for customization via the navigation system vehicle customization screen.

OK:

The items available for customization via the navigation system vehicle customization screen can be customized successfully using the GTS.




OK

NG

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)