The navigation receiver assembly stores this DTC when the SD card (disc player disc) cannot be mounted when inserted into the SD card (disc player disc) slot.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B158C | The SD card (disc player disc) cannot be mounted when inserted into the SD card (disc player disc) slot | ·
SD card (disc player disc) ·
Navigation receiver assembly |
Turn the power switch off and remove the SD card (disc player disc) from the SD card (disc player disc) slot.
Check that the SD card (disc player disc) is not damaged.
| Result | Proceed to |
|---|---|
| The SD card (disc player disc) is not damaged. | A |
| The SD card (disc player disc) is damaged. | B |
A
B
Check that the terminals of the SD card (disc player disc) are free of foreign matter. Remove foreign matter as necessary.
Check that the SD card (disc player disc) slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.
Insert the SD card (disc player disc) into the SD card (disc player disc) slot.
NEXT
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
OK
NG
Replace the SD card (disc player disc) with a new or known good one.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
OK
NG