Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › INTELLIGENT PARKING ASSIST SYSTEM › 2014.11–2020.08
RM2070E _56 Audio / Visual / Telematics _061933 PARK ASSIST / MONITORING _0301741 INTELLIGENT PARKING ASSIST SYSTEM D

PARK ASSIST / MONITORING  INTELLIGENT PARKING ASSIST SYSTEM  INITIALIZATION  


INITIALIZE INTELLIGENT PARKING ASSIST SYSTEM


a.

When "System initializing" message is displayed on the radio and display receiver assembly*1 or navigation receiver assembly*2, correct the steering angle neutral point using the following method.

i.

Fully turn the steering wheel to the right and left on a level surface.

NOTICE:

Memorizing the steering angle neutral point must be carried out with the hybrid system started. Apply the parking brake, depress the brake pedal, push the P position switch, and ensure that the vehicle is not moving.


HINT:
·

The "?" button is displayed at the same time as "System initializing" message. If the "?" button is selected, this method is displayed.

·

If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the right and left, perform Steering Angle Setting in diagnosis system (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>INTELLIGENT PARKING ASSIST SYSTEM>DIAGNOSIS SYSTEM).



*1: for Radio and Display Type

*2: for Navigation Receiver Type