Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR › from 2014.11
RM2070E _56 Audio / Visual / Telematics _061933 PARK ASSIST / MONITORING _0301743 ULTRASONIC SENSOR A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

Hide 89341A 2.REMOVE NO. 1 ULTRASONIC SENSOR

HINT:

Use the same procedure for all No. 1 ultrasonic sensors.


a.
E310578

Disconnect the connector.

HINT:

This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.



b.
E310579

Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

HINT:

This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.



Hide 89348 3.REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

HINT:

Use the same procedure for all No. 1 ultrasonic sensor retainers.


a.
E310580

Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.

HINT:

This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.