1.INSTALL AUXILIARY BATTERY
Install the auxiliary battery.
Install the auxiliary battery clamp with the bolt and nut.
Connect the auxiliary battery hose.
Push in the auxiliary battery hose to the auxiliary battery until a click sound is heard.
Connect the auxiliary battery thermometer sensor connector.
Connect the positive (+) auxiliary battery cable with the nut.
Install the auxiliary battery terminal cover.
2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Connect the negative (-) auxiliary battery cable with the nut.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
64995
3.INSTALL DECK FLOOR BOX RH
64993
4.INSTALL REAR DECK FLOOR BOX
58412A
5.INSTALL NO. 2 DECK BOARD
58411A
6.INSTALL NO. 1 DECK BOARD
58410B
7.INSTALL DECK BOARD ASSEMBLY