82641
1.INSTALL NO. 1 INTEGRATION RELAY
Connect the 3 connectors.
Engage the 2 claws to install the No. 1 integration relay as shown in the illustration.
82662A
2.INSTALL NO. 1 RELAY BLOCK COVER
Engage the 3 claws to install the No. 1 relay block cover as shown in the illustration.
3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
64995
4.INSTALL DECK FLOOR BOX RH
64993
5.INSTALL REAR DECK FLOOR BOX
58411A
6.INSTALL NO. 1 DECK BOARD
58412A
7.INSTALL NO. 2 DECK BOARD
58410B
8.INSTALL DECK BOARD ASSEMBLY