Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU) › from 2016.05
RM2070E _57 Power Source / Network _061936 NETWORKING _0301755 CAN COMMUNICATION SYSTEM(w/ Central Gateway ECU) C

NETWORKING  CAN COMMUNICATION SYSTEM(w/ Central Gateway ECU)  B1003  ECU Malfunction  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area
B1003 ECU Malfunction A malfunction in the nonvolatile storage of the central gateway ECU (network gateway ECU) is detected. Central gateway ECU (network gateway ECU)

PROCEDURE

1.RECONFIRM DTC OUTPUT
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.

Result:
Result Proceed to
DTC B1003 is not output from the central gateway ECU (network gateway ECU) (GTS display: Central Gateway) A
DTC B1003 is output from the central gateway ECU (network gateway ECU) (GTS display: Central Gateway) B




A

B

REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)