Home › Power Source / Network › NETWORKING › NETWORK GATEWAY ECU › from 2016.05
RM2070E _57 Power Source / Network _061936 NETWORKING _0301756 NETWORK GATEWAY ECU A

NETWORKING  NETWORK GATEWAY ECU  REMOVAL  


PROCEDURE

Hide 89111 3.REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD)

a.
C355492

Disengage the 2 claws and remove the central gateway ECU (network gateway ECU).

NOTICE:
·

If the ECU integration box is deformed or damaged, replace it.

·

Do not bend the 2 claws more than necessary.




Hide 89111 4.REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD)

a.
C355493

Disengage the 2 claws and remove the central gateway ECU (network gateway ECU).

NOTICE:
·

If the ECU integration box is deformed or damaged, replace it.

·

Do not bend the 2 claws more than necessary.