Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM › 2012.03–2016.05
RM2070E _58 Vehicle Interior _061938 THEFT DETERRENT / KEYLESS ENTRY _0301769 ENGINE IMMOBILISER SYSTEM T

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Engine Immobiliser System
Symptom Suspected Area See page
Security indicator light does not blink Proceed to "Security Indicator Light Does not Blinking" (Click here)
Hybrid control system cannot be started*1 Certification ECU (smart key ECU assembly) (Click here)
Hybrid control system cannot be started*1 ID code box (immobiliser code ECU) (Click here)
Power management control ECU (Click here)
Hybrid control system (Click here)
Power source mode cannot be changed*1 Power switch (Click here)
Power management control ECU (Click here)

*1: Refer to Problem Symptoms Table for Entry and Start System (for Start Function).