Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › 2014.11–2017.12
RM2070E _58 Vehicle Interior _061943 PRE-CRASH SAFETY _0301811 PRE-CRASH SAFETY SYSTEM L

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  PRECAUTION  


NOTICE FOR INITIALIZATION


NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.


System Name See Procedure
Intelligent Parking Assist System (Click here)
Power Door Lock Control System


TROUBLESHOOTING PRECAUTIONS


a.

If a terminal contact point malfunction or part installation problem occurs, removal and reinstallation of the suspected part may return the system to normal. However, be aware that the normal condition may only be temporary.


b.

Before disconnecting connectors or removing/installing parts, determine the malfunctioning area by checking and writing down the vehicle condition at the time the malfunction occurred (DTC outputs etc.).


c.

Be sure to check for DTCs related to other systems. The pre-crash system may be influenced by malfunctions in other systems.



HANDLING PRECAUTIONS


a.

When removing and installing the ECU, sensor, switch or other pre-crash system related parts, perform the following:

·

Make sure that the power switch is off unless otherwise specified in the inspection procedure.

·

After the removal/installation, check for DTCs and confirm that a normal system code is output.