Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat) › 2012.03–2014.11
RM2070E _58 Vehicle Interior _061944 SEAT _0301816 FRONT SEAT ASSEMBLY(for Manual Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Manual Seat)  REASSEMBLY  


PROCEDURE

Hide 72211C 1.INSTALL SEAT TRACK ADJUSTING HANDLE

a.
B284703

Engage the 2 hooks to install the seat track adjusting handle to the separate type front seat cushion spring assembly.


Hide 71640S 2.INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY

a.
B318150

Install the separate type front seatback assembly to the separate type front seat cushion spring assembly with the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 82168 3.INSTALL NO. 2 SEAT WIRE (w/ Lumbar Support)

a.
B315770

Connect the connector to install the No. 2 seat wire to the front seat wire.


b.
B229881

Engage the 2 clamps to install the No. 2 seat wire with front seat wire to the front seatback spring assembly.


c.

Connect the connector.


d.

for LHD:

i.
B284791

Engage the 4 clamps.



e.

for RHD:

i.
B318149

Engage the 2 clamps.



Hide 71537F 4.INSTALL NO. 2 FRONT SEAT CUSHION PROTECTOR

a.
B284868

Engage the 2 guides.


b.

Install the No. 2 front seat cushion protector with the screw.


Hide 71537E 5.INSTALL NO. 1 FRONT SEAT CUSHION PROTECTOR

HINT:

Use the same procedure as for the No. 2 front seat cushion protector.


Hide 71874 6.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)

a.
B229873

Engage the clip.


b.

Install the screw.


c.
B284862

Engage the hook to install the front seat lower cushion shield LH as shown in the illustration.


Hide 71873 7.INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)

HINT:

Use the same procedure as for the LH side.


Hide 71875G 8.INSTALL RECLINING ADJUSTER INSIDE COVER LH

a.
B284866

Engage the guide to install the reclining adjuster inside cover LH.


Hide 71876 9.INSTALL RECLINING ADJUSTER INSIDE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 71074S 11.INSTALL SEPARATE TYPE FRONT SEATBACK COVER

a.
B277150E01
0.175,2.702 0.355,2.858 0.180,0.157 10 *1 0.954,2.637 1.134,2.794 0.180,0.157 10 *2 0.532,2.748 0.375,2.779 false 0.766,2.796 0.947,2.724 false

Using hog ring pliers, connect the fastening rubber to the separate type front seatback pad with 2 new hog rings.

Text in Illustration
*1 Fastening Rubber
*2 Hog Ring

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




b.
B229858

Using hog ring pliers, install the separate type front seatback cover with 5 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 12.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.

Temporarily install the separate type front seatback cover with pad to the front seatback spring assembly.


b.
B229854

Install the front seatback cover bracket with the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

NOTICE:
·

For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.

·

Check that the strap is not twisted after installing the bracket.

·

Install the bracket securely.




c.
B229856

Engage the 4 claws to install the 2 front seat headrest supports.


d.
B229852E03
1.448,0.771 1.844,1.75 1.844,1.75 2.219,0.802 true 0.958,3.167 1.125,3.281 false 1.76,1.781 1.958,1.969 0.198,0.188 10 false *1 1.146,3.25 1.344,3.438 0.198,0.188 10 false *2

Using hog ring pliers, connect the fastening rubber to the separate type front seatback spring assembly with 3 new hog rings.

Text in Illustration
*1 Fastening Rubber
*2 Hog Ring

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




e.
B284972

Using hog ring pliers, install the separate type front seatback cover with pad with 5 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




f.

for Front Passenger Side:

i.
B229825

Engage the guide and connect the belt warning occupant detection sensor.



g.
B282166

Engage the claw and 4 clamps to connect the airbag wire harness.


Hide 71072S 13.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

a.

Temporarily install the separate type front seat cushion cover to the separate type front seat cushion pad.


b.
B284863

Using hog ring pliers, install 15 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




c.
B232926

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 14.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

a.

Temporarily install the separate type front seat cushion with pad to the front seat cushion spring assembly.


b.

Engage each hook as shown in the illustration.

B229839


c.

for 6 Way Seat Type:

i.
B229843

Engage the 2 hooks as shown in the illustration.



d.

for 4 Way Seat Type:

i.
B292111

Install the 2 clips.



e.
B229834

Engage the 4 hooks to install the separate type front seat cushion cover with pad.


f.

w/ Seat Heater System:

i.

Engage the clamp to connect the seat heater wire harness.



g.
B284792

Engage the fastener to install the airbag wire harness.


h.
B229821

Connect the rubber band.


Hide 71862 15.INSTALL FRONT SEAT INNER CUSHION SHIELD

a.
B284789

Engage the 5 claws to install the front seat inner cushion shield.


Hide 73240 16.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

Hide 73230 17.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

Hide 84920 18.INSTALL POWER SEAT SWITCH ASSEMBLY (w/ Lumbar Support)

Hide 71812D 19.INSTALL FRONT SEAT CUSHION SHIELD

a.

w/ Lumbar Support:

i.
B229817

Engage the 5 clamps.


ii.

Connect the connector.



b.
B284787

Engage the clip and 6 claws to install the front seat cushion shield.


c.

Install the screw.


Hide 72495 20.INSTALL VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

a.
B229813

Install the vertical adjusting handle with the screw.


Hide 72526A 21.INSTALL RECLINING ADJUSTER RELEASE HANDLE

a.
B231000

Engage the claw to install the reclining adjuster release handle.