Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT SEAT SIDE AIRBAG ASSEMBLY › 2012.03–2014.11
RM2070E _58 Vehicle Interior _061942 SUPPLEMENTAL RESTRAINT SYSTEMS _0301804 FRONT SEAT SIDE AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT SEAT SIDE AIRBAG ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73920A 1.INSTALL FRONT SEAT AIRBAG ASSEMBLY

CAUTION:
·

The nuts must not be reused.

·

Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.



a.

Install the front seat airbag assembly with 2 new nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Engage the 2 clamps.


Hide 2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

Hide 73920A 3.CONNECT FRONT SEAT AIRBAG ASSEMBLY

a.

w/ Seat Heater System:

i.

Engage the clamp to connect the seat heater wire harness.



b.

Engage the fastener to install the airbag wire harness.


c.

Connect the rubber band.