73390
1.INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY
Engage the band.
Engage the clamp.
| *1 | Protruding Part |
| *2 | Band |
Install the rear seat 3 point type belt assembly with the bolt.
Do not allow the anchor part of the rear seat 3 point type belt assembly to overlap the protruding part of the rear No. 1 seat cushion frame sub-assembly.
Engage the 4 clamps.
71828B
2.INSTALL REAR SEAT CUSHION MOULDING
3.INSTALL REAR NO. 1 SEAT ASSEMBLY