Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Center)
RM2070E _58 Vehicle Interior _061945 SEAT BELT _0301835 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Center) A

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Center)  INSTALLATION  


PROCEDURE

Hide 73380D 1.INSTALL REAR SEAT INNER BELT ASSEMBLY

a.

Engage the 4 clamps.


b.
B314701E02
2.302,2.792 2.302,2.969 false 1.208,0.802 1.01,0.802 false 2.219,2.979 2.385,3.167 0.167,0.188 10 true *1 0.792,0.708 0.958,0.896 0.167,0.188 10 false *2

Engage the band.

Text in Illustration
*1 Protruding Part
*2 Band


c.

Install the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding part of the rear No. 1 seat cushion frame sub-assembly.



d.

Engage the clamp and install the rear seat inner belt assembly.


Hide 71829B 2.INSTALL REAR SEAT CUSHION MOULDING LH

Hide 73350C 3.INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY

a.
B314703E02
1.167,2.906 1.083,2.99 false 1.969,1.115 2.365,1.115 false 1.01,3 1.198,3.198 0.188,0.198 10 true *1 2.385,1.021 2.573,1.219 0.188,0.198 10 false *2

Engage the band.

Text in Illustration
*1 Protruding Part
*2 Band


b.

Install the rear center seat outer belt assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear center seat outer belt assembly to overlap the protruding part of the rear No. 1 seat cushion frame sub-assembly.



Hide 71828B 4.INSTALL REAR SEAT CUSHION MOULDING RH

Hide 5.INSTALL REAR NO. 1 SEAT ASSEMBLY