Home › Vehicle Interior › HEATING / AIR CONDITIONING › ROOM TEMPERATURE SENSOR › 2014.11–2016.05
RM2070E _58 Vehicle Interior _061946 HEATING / AIR CONDITIONING _0301847 ROOM TEMPERATURE SENSOR A

HEATING / AIR CONDITIONING  ROOM TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 7.DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 55431B 9.REMOVE UPPER INSTRUMENT PANEL FINISH PANEL

Hide 88625Q 10.REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

a.
E228535

Disengage the 2 claws as shown in the illustration.


b.
E228536E03
2.125,0.885 2.531,0.885 true 2.083,1.073 2.438,1.271 true 2.563,0.823 2.771,1.063 0.208,0.24 10 true *1 2.458,1.229 2.667,1.469 0.208,0.24 10 true *2

Disconnect the aspirator and connector, and remove the cooler thermistor (room temperature sensor).

Text in Illustration
*1 Connector
*2 Aspirator