Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061952 WIPER / WASHER _0301901 HEADLIGHT CLEANER ACTUATOR A

WIPER / WASHER  HEADLIGHT CLEANER ACTUATOR  INSTALLATION  


PROCEDURE

Hide 85208A 1.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH

a.

Engage the guide to front bumper assembly.

E223786E02
6.426,0.653 6.643,0.834 0.217,0.181 10 (A)


b.

Push the tab shown by arrow (A) and engage the claw to install the headlight washer actuator sub-assembly as shown in the illustration.


c.

Install the bolt.

Torque:
1.1 N*m (11 kgf*cm, 10 in.*lbf)


d.

Connect the headlight washer hose.


Hide 85207A 2.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

HINT:

Use the same procedure for the RH side and LH side.


Hide 4.INSTALL FRONT BUMPER ASSEMBLY