Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2014.11–2015.08
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301908 LIGHTING SYSTEM C

LIGHTING (EXT)  LIGHTING SYSTEM  B124C  Automatic High Beam Camera  


DESCRIPTION

This DTC is stored when the main body ECU (multiplex network body ECU) detects a malfunction in the lane departure warning camera.

DTC No. DTC Detection Condition Trouble Area
B124C Malfunction in lane departure warning camera (automatic high beam camera)
·

Lane departure warning camera

·

Main body ECU (multiplex network body ECU)



WIRING DIAGRAM

E351326E13
0.844,1.594 3,1.885 2.156,0.292 10 false Lane Departure Warning Camera 4.719,1.583 6.354,2.042 1.635,0.458 10 false Main Body ECU (Multiplex Network Body ECU) 0.667,2.24 2.5,2.49 1.833,0.25 10 false : CAN Communication Line

CAUTION / NOTICE / HINT

NOTICE:

Confirm that the CAN communication system is not malfunctioning before performing the following inspection (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/o Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING).


PROCEDURE

1.CHECK FOR DTC (AUTOMATIC HIGH BEAM SYSTEM)

b.

Check for DTCs (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR).

OK:

DTC B124C is not output.




OK

NG

2.CHECK FOR DTC (LANE DEPARTURE ALERT SYSTEM)
2.CHECK FOR DTC (LANE DEPARTURE ALERT SYSTEM)
a.

Check for DTCs (See page Engine / Hybrid System>CRUISE CONTROL>LANE DEPARTURE ALERT SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
Lane departure alert system DTCs are not output A
Lane departure alert system DTCs are output B
CAN communication system DTCs are output C




A

3.INSPECT LANE DEPARTURE ALERT WARNING

B

C

3.INSPECT LANE DEPARTURE ALERT WARNING
a.

Check if a lane departure alert system warning message is displayed on the multi-information display.


OK:

No lane departure alert system warning message are displayed.



OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG