Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301911 FRONT TURN SIGNAL LIGHT ASSEMBLY A

LIGHTING (EXT)  FRONT TURN SIGNAL LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81529B 1.INSTALL FRONT TURN SIGNAL LIGHT BRACKET

a.

Engage the 2 guides to temporarily install the front turn signal light bracket.


b.

Install the front turn signal light bracket with the 2 screws.


Hide 81510B 2.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the socket.


b.
E253387

Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration and install them as a unit.


Hide 81520 3.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY

a.

Install the front turn signal light assembly with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


b.

Engage each clamp.


c.

Connect the connector.


Hide 4.INSTALL FRONT BUMPER ASSEMBLY