Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301911 FRONT TURN SIGNAL LIGHT ASSEMBLY A

LIGHTING (EXT)  FRONT TURN SIGNAL LIGHT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

Hide 81520 2.REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY

a.

Disconnect the connector.


b.
E253385

Disengage each clamp.


c.

Remove the 2 screws and front turn signal light assembly.


Hide 81510B 3.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E253386

Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the front turn signal light bulb from the socket.


Hide 81529B 4.REMOVE FRONT TURN SIGNAL LIGHT BRACKET

a.
E253388

Remove the 2 screws.


b.

Disengage the 2 guides and remove the front turn signal light bracket.