Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301914 HIGH MOUNTED STOP LIGHT ASSEMBLY A

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

When installing the center stop light set, perform the installation procedure from step 2.


PROCEDURE

Hide 1.INSTALL CENTER STOP LIGHT ASSEMBLY

a.

Connect the center stop light assembly connector.


b.
E297632

Install the center stop light assembly with the 2 screws.


Hide 81006 2.INSTALL CENTER STOP LIGHT SET

a.

Secure the wire running through the rear spoiler assembly to the center stop light set wire harness.


b.

Pull the wire to pass the center stop light set wire harness through the spoiler.

NOTICE:

Do not apply excessive force when pulling the wire harness or it may break.



c.

Install the center stop light set with the 2 screws to the rear spoiler assembly.

Torque:
1.0 N*m (10 kgf*cm, 9 in.*lbf)


d.

Remove the wire from the center stop light set wire harness.


e.

Connect the connector.


Hide 67939B 3.INSTALL BACK DOOR CENTER GARNISH