68961
1.INSTALL BACK DOOR STAY BOLT LH
68961
2.INSTALL BACK DOOR STAY BOLT RH
Use the same procedure as for the LH side.
68960
3.INSTALL BACK DOOR STAY ASSEMBLY LH
68950C
4.INSTALL BACK DOOR STAY ASSEMBLY RH
Use the same procedure as for the LH side.
86790D
5.INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)
85110R
6.INSTALL REAR WIPER MOTOR ASSEMBLY
85143R
7.INSTALL REAR WIPER MOTOR GROMMET
8.INSTALL REAR WIPER ARM AND BLADE ASSEMBLY
85292A
9.INSTALL REAR WIPER ARM HEAD CAP
85345R
10.INSTALL REAR WASHER NOZZLE
85345R
11.INSPECT REAR WASHER NOZZLE
85345R
12.ADJUST REAR WASHER NOZZLE
13.INSTALL REAR SPOILER ASSEMBLY
81270
14.INSTALL LICENSE PLATE LIGHT ASSEMBLY LH
81270
15.INSTALL LICENSE PLATE LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
76801
16.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
69350
17.INSTALL BACK DOOR LOCK ASSEMBLY
67372A
18.INSTALL BACK DOOR WEIGHT
Engage the guide.
Install the back door weight with the 3 bolts.
67005B
19.INSTALL BACK DOOR PANEL CUSHION
Engage the 2 claws to install 2 new back door panel cushions.
67750
20.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
Engage the guide and 14 clips to install the back door trim board assembly.
Engage the 3 guides and 3 claws to install the back door service hole cover LH.
Use the same procedure for both the RH and LH sides.
Engage the 2 guides and 2 claws to install the back door hole cover.
67938A
21.INSTALL BACK DOOR SIDE GARNISH LH
Engage the 2 claws and 2 clips to install the back door side garnish LH.
67937B
22.INSTALL BACK DOOR SIDE GARNISH RH
Engage the 2 claws and 2 clips to install the back door side garnish RH.
67939B
23.INSTALL BACK DOOR CENTER GARNISH
Engage the 4 claws and 4 clips to install the back door center garnish.
74811B
24.INSTALL DOOR PULL HANDLE
Engage the 4 claws to install the door pull handle.
With the back door fully open, install the door pull handle so that the arrow on the backside of the handle points up.
64886
25.INSTALL BACK WINDOW GLASS CHANNEL LH
Engage the grommet and clip to install the back window glass channel LH.
64885A
26.INSTALL BACK WINDOW GLASS CHANNEL RH
Engage the grommet and clip to install the back window glass channel RH.
27.ADJUST REAR TELEVISION CAMERA OPTICAL AXIS (CAMERA POSITION SETTINGS) (w/ Intelligent Parking Assist System)