When removing the center stop light set, perform the removal procedure from step 2.
1.REMOVE CENTER STOP LIGHT ASSEMBLY
Remove the 2 screws.
Disconnect the center stop light assembly connector to remove the center stop light assembly.
67939B
2.REMOVE BACK DOOR CENTER GARNISH
81006
3.REMOVE CENTER STOP LIGHT SET
Disconnect the connector.
Secure a wire around the center stop light set wire harness as shown in the illustration.
| *1 | Wire |
Use a wire long enough so that the center stop light set wire harness can be passed through the rear spoiler assembly during installation.
Remove the 2 screws.
Pull the center stop light set wire harness to remove it.
Do not apply excessive force when pulling the wire harness or it may break.
Remove the wire from the old center stop light set wire harness.