64886
1.REMOVE BACK WINDOW GLASS CHANNEL LH
Disengage the clip and grommet, and remove the back window glass channel LH.
64885A
2.REMOVE BACK WINDOW GLASS CHANNEL RH
Disengage the clip and grommet, and remove the back window glass channel RH.
74811B
3.REMOVE DOOR PULL HANDLE
Using a moulding remover, disengage the 4 claws and remove the door pull handle.
67939B
4.REMOVE BACK DOOR CENTER GARNISH
Disengage the 4 claws and 4 clips, and remove the back door center garnish.
67938A
5.REMOVE BACK DOOR SIDE GARNISH LH
Disengage the 2 clips and 2 claws, and remove the back door side garnish LH.
67937B
6.REMOVE BACK DOOR SIDE GARNISH RH
Disengage the 2 clips and 2 claws, and remove the back door side garnish RH.
67750
7.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
Using a moulding remover, disengage the 2 claws and 2 guides, and remove the back door hole cover.
Using a moulding remover, disengage the 3 claws and 3 guides, and remove the back door service hole cover LH.
Use the same procedure for both the RH and LH sides.
Using a molding remover, disengage the clip and make a clearance between the back door trim board assembly and the body.
Using the clearance and service hole, disengage the 13 clips and guide to remove the back door trim board assembly.
67005B
8.REMOVE BACK DOOR PANEL CUSHION
Disengage the 2 claws to remove the 2 back door panel cushions.
67372A
9.REMOVE BACK DOOR WEIGHT
Remove the 3 bolts.
Disengage the guide to remove the back door weight.
69350
10.REMOVE BACK DOOR LOCK ASSEMBLY
76801
11.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
81270
12.REMOVE LICENSE PLATE LIGHT ASSEMBLY LH
81270
13.REMOVE LICENSE PLATE LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
14.REMOVE REAR SPOILER ASSEMBLY
85345R
15.REMOVE REAR WASHER NOZZLE
85292A
16.REMOVE REAR WIPER ARM HEAD CAP
17.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
85143R
18.REMOVE REAR WIPER MOTOR GROMMET
85110R
19.REMOVE REAR WIPER MOTOR ASSEMBLY
86790D
20.REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)
68960
21.REMOVE BACK DOOR STAY ASSEMBLY LH
68950C
22.REMOVE BACK DOOR STAY ASSEMBLY RH
Use the same procedure as for the LH side.
68961
23.REMOVE BACK DOOR STAY BOLT LH
68961
24.REMOVE BACK DOOR STAY BOLT RH
Use the same procedure as for the LH side.