1.INSTALL FRONT BUMPER ASSEMBLY
Connect each connector.
Install the front bumper assembly as shown in the illustration.
Engage the 2 claws as shown in the illustration.
Use the same procedure for the RH side and LH side.
Install the 3 clips and 4 bolts.
Install the 6 screws.
Install the front bumper assembly with the screw.
Use the same procedure for the RH side and LH side.
53289A
2.INSTALL RADIATOR SUPPORT OPENING COVER
Engage the 3 guides.
Install the radiator support opening cover with the 3 clips.
3.ADJUST FOG LIGHT ASSEMBLY