67939B
1.REMOVE BACK DOOR CENTER GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
67750
4.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
5.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Put protective tape around the back door outside garnish sub-assembly.
| *1 | Protective Tape |
Disconnect the connector.
Remove the 4 nuts.
Using a moulding remover, disengage the 7 clips and remove the back door outside garnish sub-assembly.
Remove the 7 clips (back door outside garnish clip) from the back door outside garnish sub-assembly.
Remove the 4 gaskets from the back door outside garnish sub-assembly.
84840G
6.REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
75431A
7.REMOVE NO. 1 BACK DOOR EMBLEM