Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › from 2017.12
RM2070E _58 Vehicle Interior _061948 INTERIOR PANELS / TRIM _0301860 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


PROCEDURE

Hide 86101J 1.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 81340 2.REMOVE VANITY LIGHT ASSEMBLY

Click hereVehicle Interior>LIGHTING (INT)>VANITY LIGHT>REMOVAL

HINT:

Use the same procedure for the other vanity light.


Hide 63341D 3.REMOVE FRONT ROOF SILENCER PAD (except Glass Roof)

a.

Remove the front roof silencer pad.

B274299


Hide 63345D 4.REMOVE CENTER ROOF SILENCER PAD (except Glass Roof)

a.

Remove the center roof silencer pad.

B274300


Hide 63343B 5.REMOVE REAR ROOF SILENCER PAD

a.

Remove the rear roof silencer pad.

B274301E01
0.287,0.296 0.486,0.459 0.199,0.163 10 *A 0.287,3.014 0.486,3.177 0.199,0.163 10 *B

Text in Illustration
*A except Glass Roof *B for Glass Roof


Hide 82171 6.REMOVE NO. 1 ROOF WIRE

a.

Remove the adhesive tape from the roof headlining assembly.

B499857C01
2.24,1.156 2.542,1.208 true 0.063,0.063 0.438,0.302 0.375,0.24 12 false *A 0.073,3.146 0.448,3.385 0.375,0.24 12 false *B 2.031,1.052 2.406,1.292 0.375,0.24 12 false *C
*A except Glass Roof *B for Glass Roof
*C w/ EC Mirror or Pre-crash Safety System - -
V100155

Adhesive Tape - -



b.

Turn the visor connectors counterclockwise approximately 45° and separate the connectors from the roof headlining assembly.

B499858C01
1.833,1.458 2.25,1.458 true 1.927,1.802 2.271,1.625 true 1.792,4.208 2.208,4.208 true 0.063,0.073 0.438,0.313 0.375,0.24 12 false *A 0.063,2.771 0.438,3.01 0.375,0.24 12 false *B 1.698,1.719 2.073,1.958 0.375,0.24 12 false *D 1.594,1.365 1.969,1.604 0.375,0.24 12 false *C 1.583,4.115 1.958,4.354 0.375,0.24 12 false *C 0.792,4.531 1.021,4.698 0.229,0.167 10 true *a 0.802,1.729 1.031,1.896 0.229,0.167 10 true *a
*A except Glass Roof *B for Glass Roof
*C w/ EC Mirror or Pre-crash Safety System *D for RHD with Rain Sensor
*a 45° - -



c.

Disengage each clamp.


d.

Remove the No. 1 roof wire from the roof headlining.