Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM › from 2017.12
RM2070E _54 Brake _061923 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0301683 ELECTRONICALLY CONTROLLED BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  C1211  SLA Linear Solenoid  C1212  SLR Linear Solenoid  C1225  SA1 Solenoid Circuit  C1226  SA2 Solenoid Circuit  C1227  SA3 Solenoid Circuit  C1228  STR Solenoid Circuit  C1352  FR Solenoid  C1353  RR Solenoid  C1356  FL Solenoid  C1357  RL Solenoid  


DESCRIPTION

Each solenoid adjusts pressure which affects each wheel cylinder according to signals from the skid control ECU and controls the vehicle.

The master cut solenoid is closed and blocks the regulator pressure from the electronically controlled brake system control pressure when the system is normal. The master cut solenoid is open and sends the master cylinder and regulator hydraulic pressure to the non-assisted brake wheel cylinders during the fail-safe due to a system malfunction.

HINT:

If the supply voltage decreases, a drop in current may cause a DTC to be stored.


DTC Code INF Code DTC Detection Condition Trouble Area
C1211 21 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 22 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 23 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 24 A short to +B or voltage leaks is detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1212 31 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 32 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 33 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 34 A short to +B or voltage leaks is detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1225 41 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 42 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 43 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 44 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1226 51 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 52 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 53 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 54 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1227 61 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 62 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 63 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 64 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1228 71 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 72 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 73 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 74 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1352 11
12
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1353 15
16
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1356 13
14
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1357 17
18
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)

CAUTION / NOTICE / HINT

NOTICE:

When replacing the brake booster with master cylinder (skid control ECU or brake actuator), perform initialization and calibration of the linear solenoid valve (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>INITIALIZATION).


PROCEDURE

1.CHECK DTC

b.

Check if the same DTC is recorded (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>DTC CHECK / CLEAR).

HINT:

If a DTC for undervoltage is output, first troubleshoot the power source system.


Result:
Result Proceed to
DTCs (C1211, C1212, C1225, C1226, C1227, C1228, C1352, C1353, C1356 and C1357) are not output A
A DTC (C1241) for undervoltage is output B
DTCs (C1211, C1212, C1225, C1226, C1227, C1228, C1352, C1353, C1356 and/or C1357) are output (for LHD) C
DTCs (C1211, C1212, C1225, C1226, C1227, C1228, C1352, C1353, C1356 and/or C1357) are output (for RHD) D




A

B

C

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER

D

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER