DTC B1635/24 Rear Airbag Sensor LH Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1635/24 |
|
|
| 1.CHECK SIDE NO. 2 AIRBAG SENSOR ASSEMBLY LH |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Interchange the side No. 2 airbag sensor assembly LH with RH and connect the connectors.
Connect the cable to the negative (-) auxiliary battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1635/24 is output. | A |
| DTC B1630/23 is output. | B |
| DTCs B1630/23 and B1635/24 are not output. | C |
Turn the ignition switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Return the side No. 2 airbag sensor assembly LH and RH to their original positions and connect the connectors.
| *1 | Side No. 2 Airbag Sensor Assembly RH |
| *2 | Side Airbag Sensor Assembly LH |
|
| ||||
|
| ||||
| A | ||
| ||