Home › Drivetrain › P510 HYBRID TRANSMISSION / TRANSAXLE › HYBRID TRANSAXLE OIL SEAL

HYBRID TRANSAXLE OIL SEAL > REPLACEMENT

for Preparation Click here



1. REMOVE FRONT DRIVE SHAFT ASSEMBLY
(Click here)


2. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY TYPE T OIL SEAL


  1. Remove the LH side hybrid vehicle transaxle assembly type T oil seal.



      C249689E01
    1. Using SST, remove the hybrid vehicle transaxle assembly type T oil seal.

      SST
      09308-00010  



  1. Remove the RH side hybrid vehicle transaxle assembly type T oil seal.



      C249690E01
    1. Using SST, remove the hybrid vehicle transaxle assembly type T oil seal.

      SST
      09308-00010  



3. INSTALL HYBRID VEHICLE TRANSAXLE ASSEMBLY TYPE T OIL SEAL


  1. Install a new LH side hybrid vehicle transaxle assembly type T oil seal.



      C249687E01
    1. Using SST and a hammer, tap in a new hybrid vehicle transaxle assembly type T oil seal.

      SST
      09387-00010   (09951-07150)
      09950-70010  

      Oil seal installation depth:
      2.5 to 3.5 mm (0.0984 to 0.138 in.)

    2. Coat the lip of the hybrid vehicle transaxle assembly type T oil seal with MP grease.



  1. Install a new RH side hybrid vehicle transaxle assembly type T oil seal.



      C250064E01
    1. Using SST and a hammer, tap in a new hybrid vehicle transaxle assembly type T oil seal.

      SST
      09630-24014   (09620-24051)
      09950-60010   (09951-00410, 09951-00530, 09952-06010)
      09950-70010   (09951-07100)

      Oil seal installation depth:
      3.0 to 4.0 mm (0.118 to 0.157 in.)

    2. Coat the lip of the hybrid vehicle transaxle assembly type T oil seal with MP grease.



4. INSTALL FRONT DRIVE SHAFT ASSEMBLY
(Click here)