STEREO JACK ADAPTER ASSEMBLY > INSTALLATION |
| 1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY |
Engage the 2 claws to install the No. 1 stereo jack adapter assembly.
| 2. INSTALL INSTRUMENT PANEL BOX ASSEMBLY |
![]() |
Push the instrument panel box assembly in the direction indicated by the arrow (1) to engage the 2 claws (B) as shown in the illustration.
| *a | Claw (A) |
| *b | Claw (B) |
Push the instrument panel box assembly in the direction indicated by the arrow (2) to engage the 5 claws (A) as shown in the illustration.
Install the instrument panel box assembly with the screw.
Engage the 3 clamps.
| 3. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 3 claws, 8 clips and 3 guides to install the lower instrument cluster finish panel garnish.
| 4. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY |