Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA

NAVIGATION ANTENNA > REMOVAL

for Preparation Click here



1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY
(Click here)


2. REMOVE NO. 1 HEATER TO REGISTER DUCT ASSEMBLY


    B301694
  1. Remove the 3 screws <B> and No. 1 heater to register duct assembly.



3. REMOVE NAVIGATION ANTENNA ASSEMBLY


  1. Remove the 2 screws.


    E237170

  1. Disengage the 5 clamps and remove the navigation antenna assembly.