NAVIGATION SYSTEM (for DVD) > Display does not Dim when Light Control Switch is Turned ON |
| 1.CHECK IMAGE QUALITY SETTING |
![]() |
Enter the display quality adjustment screen.
Turn the light control switch to the tail position.
Check if "Day Mode" on the display quality adjustment screen is on.
| Result | Proceed to |
| "Day Mode" is on | A |
| "Day Mode" is off | B |
| *A | for LHD |
| *B | for RHD |
| *1 | Example |
|
| ||||
| A | ||
| ||
| 2.CHECK VEHICLE SIGNAL (OPERATION CHECK) |
![]() |
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Click here).
Check that the display changes between ON and OFF according to the light control switch operation.
| Light Control Switch | Display |
| tail or on | ON |
| off | OFF |
|
| ||||
| OK | ||
| ||