Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Screen Flicker or Color Distortion

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISPLAY SETTING


    E196052E02
  1. Enter the display quality adjustment screen.

  1. Reset display settings (contrast, brightness) and check that the screen appears normal.

    OK:
    The display returns to normal.

Text in Illustration 
*A
for LHD
*B
for RHD
*1
Example


NG
Go to step 2
OK

END 

2.CHECK CABIN
  1. Check that the cabin temperature is higher than -20°C (-4°F).

    OK:
    The cabin temperature is higher than -20°C (-4°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3.CHECK COLOR BAR (OPERATION CHECK)


    E176520
  1. Enter the "Color Bar Check Mode" screen. Refer to Check Color Bar in Operation Check (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)