Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CELLULAR PHONE
  1. Check if the other caller can hear your voice correctly.

    OK:
    Your voice can be heard correctly.



NG
REPLACE CELLULAR PHONE
OK


2.CHECK SETTINGS


    E196069E02
  1. Check if the Mute switch is set to on.

    OK:
    Mute switch is not set to on.

Text in Illustration 
*A
for LHD
*B
for RHD
*1
Example


NG
TURN MUTE SWITCH OFF
OK


3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)


    E187218E01
  1. Enter the "Microphone & Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check (Click here).

  1. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

  1. Push the recording switch and perform voice recording.

    HINT:
    Voice can be recorded up to 5 seconds.

  1. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

    OK:
    All check results are normal.

Text in Illustration 
*1
Microphone Input Level Meter
*2
Recording Switch
*3
Stop Switch
*4
Play Switch
*5
Recording Indicator


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)