Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > CD/DVD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
DISC WAS FAULTY
OK


2.CHECK DISC


    I100201E04
  1. Check the disc.

    OK:
    The disc is clean.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



NG
CLEAN DISC
OK


3.CHECK OPERATION WITH ANOTHER CD
  1. Check if the same problem occurs again using a known good disc.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

DISC WAS FAULTY 

4.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check the navigation receiver assembly installation condition.

    1. Check that the navigation receiver assembly is properly installed.

      OK:
      The navigation receiver assembly is properly installed.



NG
REINSTALL NAVIGATION RECEIVER ASSEMBLY PROPERLY
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)