Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for HDD)

DTC    B15E1    Media Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when the navigation receiver assembly cannot read the media.

DTC No.
DTC Detection Condition
Trouble Area
B15E1
When one of the conditions below is met:
  1. An unsuitable disc is inserted.
  2. The disc cannot be read.
  3. The disc cannot be read because of dirt or scratches.
  4. The disc cannot be read because it is inserted upside down.
  5. The disc cannot be read because a high or low temperature is detected.
  6. Internal power supply abnormality
  7. There are no playable files.
  8. The disc contains unreadable copy-protected content.
  1. CD
  2. Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or anti-static preservative.


NEXT


3.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another and recheck.

  1. Clear the DTC (Click here).

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END