DTC C1695 Zero point Calibration of Vehicle Height Sensor Incomplete |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1695 | Zero point calibration of vehicle height sensor is incomplete |
|
| 1.ADJUST SETTINGS (HEIGHT CONTROL SENSOR VEHICLE HEIGHT DIFFERENCE SETTING) |
Perform the following procedure depending on the memory conditions to register the vehicle information into the parking assist ECU.
Height control sensor vehicle height difference setting (Click here)
| NEXT | |
| 2.CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Check for DTCs (Click here).
| Result | Proceed to |
| DTC C1695 is output | A |
| DTCs are not output | B |
|
| ||||
| A | ||
| ||