DTC C1626 Steering Angle Sensor Failure |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1626 | A fail flag is transmitted from the steering angle sensor. | Steering angle sensor (spiral cable with sensor sub-assembly) |
| 1.REPLACE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY |
Replace the spiral cable with sensor sub-assembly (Click here).
| NEXT | |
| 2.CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Check for DTCs (Click here).
| Result | Proceed to |
| DTC C1626 is output | A |
| DTCs are not output | B |
|
| ||||
| A | ||
| ||