TIRE PRESSURE WARNING SYSTEM > DATA LIST / ACTIVE TEST |
| DATA LIST |
Turn the power switch off.
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
According to the display on the Techstream, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Mode Status | Tire pressure warning system mode/ NORMAL or TEST | NORMAL: Normal mode TEST: Test mode | - |
| Main Tire | Number of main tire ID to be registered/ 0 or 1 or 2 or 3 or 4 | 0 to 4 displayed | - |
| Vehicle Speed | Vehicle speed reading/ min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) | Actual vehicle speed | Speed indicated on the combination meter |
| Registered ID1 Code | Registered ID1 code/ min.: 0, max.: FFFFFFF*1 | ID No. registered in transmitter ID1 displayed | - |
| Registered ID2 Code | Registered ID2 code/ min.: 0, max.: FFFFFFF*1 | ID No. registered in transmitter ID2 displayed | - |
| Registered ID3 Code | Registered ID3 code/ min.: 0, max.: FFFFFFF*1 | ID No. registered in transmitter ID3 displayed | - |
| Registered ID4 Code | Registered ID4 code/ min.: 0, max.: FFFFFFF*1 | ID No. registered in transmitter ID4 displayed | - |
| ID Transmission Status | ID code transmission status/ FINISH or NOW | FINISH or NOW | - |
| Initialization Switch | Tire pressure warning reset switch/ ON, OFF | ON: Switch on OFF: Switch off | - |
| ID1 Tire Inflation Pressure | ID1 tire inflation pressure/ min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Actual tire inflation pressure | If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*2 |
| ID2 Tire Inflation Pressure | ID2 tire inflation pressure / min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Actual tire inflation pressure | If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*2 |
| ID3 Tire Inflation Pressure | ID3 tire inflation pressure / min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Actual tire inflation pressure | If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*2 |
| ID4 Tire Inflation Pressure | ID4 tire inflation pressure / min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Actual tire inflation pressure | If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*2 |
| ID1 Temperature in Tire | ID1 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID2 Temperature in Tire | ID2 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID3 Temperature in Tire | ID3 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID4 Temperature in Tire | ID4 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | If -40°C (-40°F) is displayed, data has not been received. |
| ID1 Battery Voltage | ID1 battery voltage/OVER or LESS | OVER | - |
| ID2 Battery Voltage | ID2 battery voltage/OVER or LESS | OVER | - |
| ID3 Battery Voltage | ID3 battery voltage/OVER or LESS | OVER | - |
| ID4 Battery Voltage | ID4 battery voltage/OVER or LESS | OVER | - |
| Initialization Switch Info | Tire pressure warning reset switch setting information/ WITH or WITHOUT | WITH | - |
| ID1 Initial Threshold of Low-pressure | ID1 initial threshold of low-pressure/ min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Tire pressure after initialization | - |
| ID2 Initial Threshold of Low-pressure | ID2 initial threshold of low-pressure/ min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Tire pressure after initialization | - |
| ID3 Initial Threshold of Low-pressure | ID3 initial threshold of low-pressure/ min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Tire pressure after initialization | - |
| ID4 Initial Threshold of Low-pressure | ID4 initial threshold of low-pressure/ min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi) max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi) | Tire pressure after initialization | - |
| Number of Trouble Code | Number of DTCs recorded/min.: 0, max.: 255 | Min.: 0, Max.: - | - |
| Active Test |
Turn the power switch off.
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Combination Meter / Active Test.
Check the operation by referring to the table below.
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Indicat. Tire Pressure Warning System | Tire pressure warning light | Tire pressure warning light OFF or ON | Confirm that the vehicle is stopped, engine idling |