HEADLIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL HEADLIGHT ASSEMBLY |
Connect each connector.
![]() |
Engage the clamp.
![]() |
Engage the claw.
Install the headlight assembly with the bolt and 2 screws.
| 2. INSTALL FRONT BUMPER ASSEMBLY |
| 3. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL |
| 4. INSTALL REAR NO. 3 FLOOR BOARD |
![]() |
Engage the 2 guides to install the rear No. 3 floor board.
| 5. INSTALL REAR DECK FLOOR BOX |
Install the rear deck floor box.
| 6. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) |
![]() |
Engage the 3 guides <A>.
Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.
| 7. ADJUST HEADLIGHT AIMING |
| 8. ADJUST FOG LIGHT AIMING (w/ Fog Light) |