Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM (for Brushless Type Motor)

DTC    U0129    Lost Communication with Brake System Control Module

DTC    U0293    Lost Communication with HV ECU

DTC    U1104    Lost Communication with Driving Support ECU

for Preparation Click here


DESCRIPTION

The power steering ECU receives signals from the power management control ECU, the skid control ECU and the driving support ECU via the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0129
Lost communication with brake system control module
  1. CAN communication system
  2. Brake booster with master cylinder (skid control ECU)
U0293
Lost communication with power management control ECU
  1. CAN communication system
  2. Power management control ECU
U1104
Lost communication with driving support ECU
  1. CAN communication system
  2. Driving support ECU

INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC is not output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK

CHECK INTERMITTENT PROBLEMS