SAFETY CONNECT SYSTEM > GREEN INDICATOR REMAINS OFF |
| 1.CONFIRM GREEN INDICATOR COMES ON |
After the power switched on (IG) and the manual (SOS) switch red indicator has come on for 2 seconds, confirm that the manual (SOS) switch green indicator comes on for 2 seconds.
|
| ||||
| OK | |
| 2.CONFIRM SUBSCRIPTION MODE |
Confirm the indicator status at 5 seconds after power switch on (IG).
| Result | Proceed to |
| Green indicator remains on | A |
| Green indicator remains off | B |
| Red and Green indicators both flash (1 second intervals, for 20 seconds) | C |
|
| ||||
|
| ||||
| A | ||
| ||
| 3.INPUT VIN WITH TECHSTREAM |
Turn the power switch off.
Connect the Techstream to the DLC3.
Turn the power switch on (IG) and wait for 10 seconds.
Turn the Techstream on.
Select "Vehicle Inquiry" and input VIN.
| NEXT | |
| 4.CONFIRM SUBSCRIPTION MODE |
Confirm the indicator status at 5 seconds after the power switch on (IG).
| Result | Proceed to |
| Green indicator remains on | A |
| Green indicator remains off | B |
|
| ||||
| A | ||
| ||
| 5.REPLACE DCM (TELEMATICS TRANSCEIVER) |
Replace the DCM (Telematics Transceiver) (Click here).
| NEXT | ||
| ||
| 6.CHECK DTC |
Turn the power switch off.
Connect the Techstream to the DLC3.
Turn the power switch on (IG) and wait for 10 seconds.
Turn the Techstream on.
Perform "HEALTH CHECK" and check for current DTCs (Click here).
| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
|
| ||||
| A | |
| 7.REPLACE DCM (TELEMATICS TRANSCEIVER) |
Replace the DCM (Telematics Transceiver) (Click here).
| NEXT | ||
| ||