Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER PUMP

BRAKE BOOSTER PUMP > REMOVAL

for Preparation Click here



1. REMOVE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

HINT:
Refer to the procedure up to Remove Brake Booster with Master Cylinder Assembly (Click here).



2. REMOVE FRONT CROSS MEMBER SUB-ASSEMBLY

HINT:
Refer to the procedure up to Remove Front Cross Member Sub-assembly (Click here).



3. REMOVE NO. 5 BRAKE ACTUATOR BRACKET


    C208393
  1. Remove the 2 nuts and No. 5 brake actuator bracket.

  1. Separate the wire harness clamp.



4. REMOVE BRAKE BOOSTER PUMP ASSEMBLY WITH BRACKET


    C208392
  1. Disconnect the 2 connectors and separate the clamp from the brake booster pump assembly.



    C208389E01
  1. Remove the clip and brake actuator hose.
    Text in Illustration 
    *1
    Brake Actuator Hose
    *2
    No. 2 Brake Tube Clamp
    *3
    No. 1 Brake Tube Clamp
    *4
    Front No. 1 Brake Tube

  1. Remove the 2 bolts, No. 1 brake tube clamp and No. 2 brake tube clamp.

  1. Disconnect the front No. 1 brake tube.



    C212065E01
  1. Separate the wire harness clamp, 2 fuel lines and front No. 4 brake tube from the brake booster pump assembly.
    Text in Illustration 
    *1
    Wire Harness Clamp
    *2
    Fuel Line
    *3
    Front No. 4 Brake Tube



    C208387
  1. Remove the 3 nuts and brake booster pump assembly with bracket.



5. REMOVE BRAKE BOOSTER PUMP ASSEMBLY


    C208394E01
  1. Remove the 2 nuts, brake booster pump bushings, brake actuator case collars and brake booster pump assembly from the brake actuator bracket assembly.
    Text in Illustration 
    *1
    Nut
    *2
    Brake Actuator Case Collar
    *3
    Brake Booster Pump Bushing
    *4
    Brake Actuator Bracket Assembly
    *5
    Brake Booster Pump Assembly